SpoolRadar
Submit a deal

What is high speed PETG, and is it worth it?

High speed PETG is PETG filament that the manufacturer has formulated or tuned to print at higher speeds than regular PETG. It is sold under names such as high speed, rapid, hyper or HF PETG. Whether it is worth it depends on your printer, because the printer often limits speed before the filament does.

The cheapest high speed PETG we track right now is Tinmorry · High Speed PETG · 1 kg at 8.07 EUR/kg (per kg including VAT, excluding shipping). Last updated 18 Nov 2026, 07:33 CET.

Definition

There is no common standard for the term. Each manufacturer decides what "high speed" means for its own product. Typically it describes a filament that flows more easily when melted, so it can be extruded faster at the same quality, often together with recommended print settings for higher speeds. Because the label is not standardized, treat it as a marketing category and check the data sheet.

Typical speed claims

Manufacturers usually state a maximum print speed somewhere between about 300 and 800 mm/s. These are best-case figures, and you should not expect to reach them on every model or printer.

In practice, the limiting factor is often the volumetric flow of your hotend, measured in mm³/s: how much plastic it can melt and push through the nozzle per second. A printer with a modest hotend will not print much faster just because the spool says "high speed". Acceleration, cooling and the shape of the model also matter.

Some manufacturers and reviewers describe a trade-off between speed and strength or surface finish. How large it is depends on the product and settings, so check the manufacturer's data sheet and independent tests for the filament you are considering.

When high speed PETG makes sense

When regular PETG is enough

Cheapest high speed PETG right now

  1. Amazon.de ↗
    8.07EUR/kg
  2. JAYO ↗
    8.26EUR/kg
  3. Amazon.de ↗
    9.13EUR/kg
  4. Amazon.de ↗
    9.99EUR/kg
  5. Amazon.de ↗
    10.00EUR/kg
  6. Amazon.de ↗
    10.20EUR/kg
  7. Amazon.de ↗
    11.00EUR/kg
  8. Amazon.de ↗
    11.50EUR/kg
  9. Amazon.de ↗
    11.89EUR/kg
  10. Amazon.de ↗
    11.99EUR/kg

See all high speed PETG on the price overview.

FAQ

Is high speed PETG stronger than regular PETG?

There is no general rule. Some manufacturers and testers report a trade-off between speed and strength or finish, but it depends on the product and your print settings. Check the data sheet.

Can I print high speed PETG on any printer?

You can usually print it on any printer that handles PETG, but you will only gain speed if your printer can feed and melt filament fast enough. Start with the manufacturer's recommended settings.

Do I need to dry high speed PETG?

PETG absorbs moisture from the air, and wet filament can cause stringing and a rough surface. Keep spools sealed or dry, and follow the manufacturer's advice.

Why is the speed on the box so high?

It is usually a best-case maximum. In normal use, your hotend's volumetric flow limits speed more than the number on the packaging.

Is high speed PETG more expensive?

Sometimes, but not always. Compare price per kg on SpoolRadar and use the high speed filter to see the current spread.

Loading…